Salt Lake City Foundation Experts logoSalt Lake City Foundation ExpertsFoundation Repair · Salt Lake City, UT
Menu
driveway lifting in Salt Lake City, UT

Salt Lake City Foundation Experts

Driveway Lifting in Salt Lake City, UT

Driveway lifting in Salt Lake City raises sunken slabs near the garage with polyurethane foam injection, free estimates available.

Serving Salt Lake City and nearby communities.

The spot where a driveway meets the garage is usually the first place to sink, and for good reason: soil under that transition gets compacted during construction, then softens every spring as snowmelt saturates the ground. Salt Lake City Foundation Experts lifts sunken driveway slabs with polyurethane foam injection, bringing the section back to grade without tearing out and repouring the concrete.

This is a focused version of our broader concrete lifting work, built specifically around the load and traffic patterns of a driveway. We drill small access holes, inject expanding foam beneath the slab, and raise it in place, which is why most driveways are back in service the same day.

What's included

What's included with Driveway Lifting

Typically included: slab assessment at the garage approach and along the driveway, access hole drilling, foam injection to lift and correct slope, hole patching.

Optional: joint sealing where the driveway meets the garage slab, minor surface crack repair.

Customer prep: move vehicles off the driveway and clear the work area before the crew arrives.

How it works

How our Driveway Lifting process works

  1. Driveway Inspection photo
    Step 1

    Driveway Inspection

    Sunken or sloped sections are identified for correction.

  2. Access Drilling photo
    Step 2

    Access Drilling

    Small holes are drilled at strategic points along the driveway.

  3. Foam Injection photo
    Step 3

    Foam Injection

    Expanding foam is pumped beneath the slab to raise it evenly.

  4. Slope Correction photo
    Step 4

    Slope Correction

    The surface is adjusted to restore proper drainage direction.

  5. Hole Sealing photo
    Step 5

    Hole Sealing

    Drilled holes are patched to blend with the existing surface.

  6. Surface Review photo
    Step 6

    Surface Review

    The driveway is inspected for even, stable elevation.

Materials

Materials and methods for Driveway Lifting

A driveway carries vehicle weight every day, so the lifting material has to hold up under repeated load, not just look level on day one.

  • Polyurethane Foam photo

    Polyurethane Foam

    Provides lightweight lift without adding excess weight to soil that's already softened by seasonal moisture.

  • Concrete Patch Mix photo

    Concrete Patch Mix

    Used to seal access holes after injection work, matched to the surrounding slab texture.

  • Joint Sealant photo

    Joint Sealant

    Reseals expansion joints disturbed during the lifting process, important where the driveway meets the garage apron.

  • Surface Sealer photo

    Surface Sealer

    Protects the driveway from moisture and future cracking through SLC's freeze-thaw winters.

  • Leveling Equipment photo

    Leveling Equipment

    Ensures accurate measurement during the lifting procedure so the slab matches the garage floor height.

  • Bonding Primer photo

    Bonding Primer

    Improves patch adhesion to the original concrete surface for a repair that holds.

Timeline

How long does driveway lifting take?

  1. 01

    Stage 1

    Most driveway sections lift in a single appointment, with the crew working section by section until the slab sits level with the garage floor.

  2. 02

    Inspection and quote

    same day
  3. 03

    Drilling and injection

    1–2 hours

    per affected section.

  4. 04

    Patch and finish

    same visit, driveway usable within an hour.

Need a schedule that fits?

Get a Free Estimate

Codes & permits

Permits and codes for Driveway Lifting

Confirm with Salt Lake County building services if your driveway connects to a public street section.

Typically needs a permitOften no permit
Work that extends into a public street apron or municipal right-of-wayLifting a private residential driveway slab
—Routine foam injection at the garage approach
—Patching and resealing after lift work

Cost

What does driveway lifting cost in Salt Lake City?

Pricing scales with how many slab sections need lifting and how deep the void under the driveway has become. Call for a free estimate to get an exact number for your driveway.

Project typeTypical rangeWhat’s included
Single sunken section$400-$900one panel near the garage or street edge.
Multi-panel driveway$1,000-$2,200several panels lifted and leveled together.
Full driveway correction$2,000-$3,500broader slope and void correction across the whole slab.

These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.

Want a number for your home?

Get a Free Estimate

DIY vs pro

DIY vs hiring a pro for Driveway Lifting

DIYHire a pro
Filling a hairline surface crack with patch compoundLifting the slab itself, since gravel or patch fill on top doesn't address the void causing the sink, the driveway keeps dropping back
Watching a slight dip for a season to see if it's progressingAny sinking near the garage threshold, where water can track toward the house if the slope isn't corrected
—Driveways with multiple uneven panels, where an even lift across sections takes injection control a DIY kit doesn't provide

When to call

When to call for Driveway Lifting

Call Salt Lake City Foundation Experts or request a free estimate before the gap widens further.

  • The driveway sinks or dips near the garage every spring
  • There's a visible gap or step where the driveway meets the garage floor
  • Water pools on the driveway instead of running toward the street
  • A section has dropped enough to catch a tire or cause a trip hazard

Before & after

Before and after Driveway Lifting

  • driveway lifting in Salt Lake City, UT
    Before
  • driveway lifting in Salt Lake City, UT
    After

FAQs

Driveway Lifting FAQs

Why does my driveway sink near the garage every spring?

Soil under the garage approach often loosens from winter snowmelt and freeze-thaw cycling, and that softened ground compresses under the weight of vehicles, leaving a dip right at the transition.

How much does driveway lifting cost in Salt Lake City?

Most jobs run $400 to $2,200 depending on how many panels need lifting, with full-driveway correction running higher.

Is driveway lifting permanent?

The lift itself holds well, but if the underlying soil issue isn't addressed, like persistent water pooling at the same spot, the area can settle again over time.

Do I need a permit for driveway lifting?

Usually not for a private driveway. If your driveway ties into a public street apron, check with Salt Lake County building services first.

Can you lift just one section of a cracked driveway?

We can target individual panels. If a section is badly cracked or broken, we'll flag it during the inspection since lifting works best on intact slabs.

How long before I can park on the driveway again?

Foam cures quickly, so most driveways are ready for vehicle use within an hour of the lift.

Next step

Get a Driveway Lifting estimate in Salt Lake City

Call (385) 217-2051 or request a free estimate to get that sinking driveway back to level.

Ask about Driveway Lifting

Tell us about the project and how to reach you.

Call (385) 217-2051